Central Institute of Tool Design, Hyderabad : Admission to Long Term Courses 2009

Rs.

Description

MSME-Tool Room, Central Institute of Tool Design, Hyderabad

Admission to Long Term Courses 2009

Central Institute of Tool Design is an ISO 9001:2000 certified premier Institute in Asia to provide specialized training in Tool Engineering, CAD/CAM & Mechatronics. The objective of the Institute is to meet the requirements of the Industries in the field of Tool Design & Manufacture and to train the technical personnel in these fields. The Institute was originally established in the year 1968 by the Govt. of India with the assistance of UNDP and ILO.

Commencement of Issue of Application Forms	May 6, 2009
Last Date for submission of duly filled in Application Forms at CITD upto 5.00 P.M	June 27, 2009
Last date for receipt of filled in applications with late fee of Rs.200/- at CITD upto 5.00 p.m.	June 30, 2009
Entrance Test at Hyderabad	July 12, 2009

Applications are invited in the prescribed form for admission into the following Long Term courses commencing from August 2009.

Course -1	Post Graduate Course in Tool, Die & Mould Design (PGTD) ( Recognized by the Govt. of India, Ministry of Education, as an advanced Post Graduate qualification.)
Duration	One and a half years. ( 3 semesters)
Eligibility	B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.
Age	30 years ( not born before 31.08.1978), for self sponsored.
No. of Seats	a) 32 seats Self sponsored. b) 28 seats Industry sponsored.
Course Fee	a) Rs. 35,000/- for Self Sponsored b) Rs. 46,000/- for Industry sponsored.

Course -2	Post Diploma Course in Tool Design (PDTD)
Duration	One year. ( 2 semesters)
Eligibility	LME/DME with an aggregate of minimum 60% marks for general category candidates and an aggregate of minimum 50% marks for SC/ST category candidates.
Age	27 years ( not born before 31.08.1981), for self sponsored.
No. of Seats	a) 36 seats Self sponsored. b) 24 seats Industry sponsored.
Course Fee	a) Rs. 20,000/- per semester for Self Sponsored b) Rs. 25,000/- per semester for Industry sponsored.

Course -3	Diploma Course in Tool, Die & Mould Design (DTDM)
Duration	Four years ( 8 semesters)
Eligibility	SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 40% marks for SC/ST category candidates.
Age	15 to 19 years ( not born before 31.08.1989)
No. of Seats	60 seats
Course Fee	Rs.10,000/- per semester.

Course -4	Advanced Tool Makers Course (ATM)
Duration	Two years (4 semesters)
Eligibility	SSC/Matric with ITI in any one of the trades-Tool & Die Maker/Fitter/ Machinist/Turner
Age	25 years (not born before 31.08.1983)
No. of Seats	30
Course Fee	Rs.12,000/- per year

Course -5	Advanced Machinist Course (AMC)
Duration	Three years (6 semesters)
Eligibility	SSC (10th Class) or equivalent examination appeared but failed with Maths & Science as subjects.
Age	15 – 24 years (not born before 31.8.1984).
No. of Seats	15 minimum and 30 maximum
Mode of selection	Selection on the basis of marks obtained in Maths & Science subjects in the qualifying examination i.e. 10th class failed.
Course Fee	Rs.6,000/- per semester

Selection :

Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course.
Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the
category.
For ATM course, the candidates will be selected based on merit in the qualifying examinatios i.e. X class & ITI with weightage in the ratio of 50:50 respectively
For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed)

How to Apply :

Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37

Application form can also be downloaded from the insitute website and
the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

More details can be obtained from the institute website.

Address	:	MSME-Tool Room, Hyderabad Central Institute of Tool Design (A Govt. of India Society, Ministry of MSME) Balanagar, Hyderabad – 500 037 (A.P.)
Phone	:	040-23771959, 23776156, 23772747 ,23772748
Fax	:	040-23772658
E-mail	:	citdplacements@citdindia.org
Website	:	www.citdindia.org